The Recessed Induction Gate is designed to be recessed into a constructed cavity in the wall that is approximately 5” deep x 52” high x 86” long (13cm x 132cm x 218 cm). An upper angle iron header is furnished that must be incorporated into the wall cavity. Also, a square tube structural support is included that will act as the anchor point for the gate when it is mounted. Recommended installation of the gate is a minimum of 28” (71cm) from a room corner. When the gate is closed, it becomes flush with the surrounding wall surface. Padding of the gate is not offered.
Induction Gate
Surface Mount Induction Gate
The Surface Mount Induction Gate is equipped with a flat metal mounting plate which allows it to be permanently anchored to the supporting wall structure (Note: concrete blocks must be grouted/filled to support installation). Recommended installation of the gate is approximately 2” (5cm) off the finished floor, and a minimum of 28” (71cm) from a room corner. Padding of the gate is not offered.
History
Shank’s Veterinary Equipment, Inc., originally Shank’s Machine Co., Inc., began manufacturing large animal surgery tables in 1957. The company initially manufactured one simple table that could handle a partially sedated large animal and lay it from a standing position to its side. The Shank’s® Douglas Tiltmaster Table (commonly referred to as the Shank’s® Tilt Table) […]